Copying Both Sides Of A Card As Asingle Page (Card Shot) - Sharp MX-3070N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES
COPYING BOTH SIDES OF A CARD AS A SINGLE PAGE
(CARD SHOT)
This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification purposes and helps save paper.
Front
Back
To change the default original size during Card Shot:
In "Setting mode (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Card Shot Settings].
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Select the paper to be used for card shot.
2
Set a paper by referring to the
Tap the [Others] key, and tap the [Card Shot] key.
3
4
Others
Card Shot
Off
On
X
Back
Example of an 8-1/2" x 11" (A4)
size portrait copy
"SELECTING THE PAPER TRAY FOR COPYING (page
Background Adjustment
Color Mode
Exposure
Select Type/Exposure
(1 ~ 8 1/2)
2 1/8
Y
inch
3 3/8 (1 ~ 8 1/2)
inch
Size Reset
Preview
Adjust to Paper Size
Size : 8½x11
B/W
Start
4 11x17
Example of an 8-1/2" x 11" (A4)
size landscape copy
Tap the [On] key, and specify the
original size as required.
After the settings are completed, tap
sequence.
CA
Color
Start
2-52
2-13)".
and [Back] keys in