Scan Settings; Initial Status Settings - Sharp MX-3070N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Scan Settings

Settings related to the image send function (Scan, Internet fax, etc.) can be configured.
For an explanation of settings related to the fax function, see "IImage Send Settings (page 7-165)"

Initial Status Settings

The following settings are related to the scanner.
Default Colour Mode Settings
Select a default color mode setting for both color and black & white in e-mail address, network folder, FTP and Desktop.
Specify "Scanner Common" unless E-mail is specified.
Settings
*
Auto (Mono2, Grayscale ), Full Color, Grayscale, Mono 2
* When scanning a black and white original with the color mode set to [Auto]
Disable Change of B/W Setting in Auto Mode: Disables black & white settings from the base screen when the color
mode is set to Auto.
Initial File Format Setting
Specify the initial file format for sending a file in E-mail, Network Folder, FTP, or Desktop mode. Specify "Scanner
Common" unless E-mail is specified.
File Format
*1 *2, 5 *2, 5 *4
PDF, PDF/A, TIFF, JPEG , Compact PDF , Compact PDF (Ultra Fine) , Compact PDF/A , Compact PDF/A
*4 *3, 5 *3, 5
(Ultra Fine) , Encrypt PDF, Encrypt/Compact PDF , Encrypt/Compact PDF (Ultra Fine) , XPS
*1 When [Black & White] is selected, the format is [PDF].
*2 When [Black & White] is selected, the format is [PDF].
*3 When [Black & White] is selected, the format is [Encrypt PDF].
*4 When [Black & White] is selected, the format is [PDF/A].
Black & White
Compression Mode: None, MH (G3), MMR (G4)
Color/Grayscale
Data compression ratio: Low, Medium, High.
Emphasize Black Letter
Specified Pages per File
Generates a separate file for each scanned page when multiple pages are scanned.
If this setting is enabled, a number of pages per file can be specified.
Page No.
Any number of pages can be specified as the number of pages per file. This setting can be used if [Specified Pages per
File] is enabled.
When [JPEG] is selected for the file type, [Specified Pages per File] cannot be selected.
7-92