Checking The Number Of Scanned Original Sheets (Original Count) - Sharp MX-3070N User Manual

COPIER►OTHER FUNCTIONS
6
Color Mode
Full Color
Original
Auto 8½x11
Paper Select
Auto
2-Sided Copy
1 → 1
Copy Ratio
100%
Exposure
Auto
Sort/Group
Auto
Others
You can also change the number of copies. To change the number of copies, use the numeric keys.
• In Proof Copy, unavailable function keys are not displayed.
• Some available functions may be restricted.
• To cancel all settings:
Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key.
7
CHECKING THE NUMBER OF SCANNED ORIGINAL
SHEETS (ORIGINAL COUNT)
This function counts the number of scanned original sheets, and displays the result before making a copy.
By allowing you to check the number of original sheets that were scanned, this helps reduce the occurrence of copy
mistakes.
• The count result is displayed with the number of scanned original sheets, not the number of scanned original pages. For
example, when 2-sided copying is performed using one original, the number "1" will appear to indicate that one original
sheet was scanned, not "2" to indicate the front-side page and the reverse side page.
• Original Count must be specified before scanning the original.
Tap the [Others] key, and tap the [Original Count] key.
1
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the Original Count setting:
Tap the [Original Count] key to uncheck it.
Place the original in the document feeder tray of the automatic document
2
feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
Program Registration
No. of copies
1
Register Current Settings
Call Eco Program
1 2 3
4 5 6
7 8
Press [Start Print] to continue.
To make a proof copy again,
0
press [Proof Copy].
Proof Copy
Plain
8½x11
1
8½x11
2 8½x11R Start Print
3 8½x14
4 11x17
Check the copy result. If no problem is
found, tap the [Start Print] key.
As necessary, change the settings and repeat proof copying
until you are satisfied with the copy result.
CA
2-74