Sharp MX-3070N User Manual page 479

FACSIMILE►PERFORMING F-CODE COMMUNICATION
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 4-8)
Tap the [Others] key, and tap the [Polling] key.
2
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
To cancel the Polling setting:
Tap the [Polling] key to clear the checkmark.
Specify the destination.
3
Enter the destination line number using the numeric keys.
Tap the [Sub Address] key.
Symbol "/" is entered.
Enter the sub-address using the numeric keys.
Tap the [Passcode] key.
Symbol "/" is entered.
Enter the passcode using the numeric keys.
• If the sub-address and passcode are already registered, you can select a one-touch key as well.
• If the passcode is omitted for the memory box of destination machine, you can skip Steps (4) and (5).
Tap the [Start] key.
4
Your machine will call the other machine and initiate reception of the fax.
4-110