Operation Panel - Sharp MX-3070N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

OPERATION PANEL

This section describes the names and functions of the respective parts of the operation panel.
(1)
(1) Data Notification indicator
The indicator lights solidly or blinks to indicate the status
of a job.
When the job separator (upper tray) is used for output,
this blinks until the output is removed.
► NOTIFICATION INDICATOR (page 1-9)
(2) Touch panel
Messages and keys appear on the touch panel display.
Operate the machine by directly tapping the displayed
keys.
► TOUCH TYPES (page 1-11)
(3) Error indicator
Lights solidly or blinks to indicate the status of the error.
► NOTIFICATION INDICATOR (page 1-9)
(4) Main power indicator
This lamp lights up when the machine's main power switch
is in the " " position.
Blinks green during the time that the [Power] button does
not operate immediately after the main power switch is
switched on.
► TURNING ON THE POWER (page 1-10)
[Home Screen] button
Use your finger to touch the [Home Screen] button.
If you use a pen or other tool to touch the button, it may not operate properly.
Risk of malfunctioning if you use with jewelry or other accessories.
(2)
(5)
(6)
(7)
1-8
(3) (4) (5) (6) (7)
[Power] button
Use this button to turn the machine's power on and off.
► TURNING ON THE POWER (page 1-10)
[Power Save] button/indicator
Use this button to set the machine to Sleep mode for
energy saving.
[Power Save] button blinks when the machine is in Sleep
Mode.
► AUTO POWER SHUT-OFF TIMER (page 1-27)
[Home Screen] button
Use this button to display the home screen.
► HOME SCREEN (page 1-14)