Stamping Scanned Originals(Verification Stamp) - Sharp MX-3070N User Manual

FACSIMILE►OTHERS FUNCTION
STAMPING SCANNED ORIGINALS(VERIFICATION
STAMP)
This function stamps each original that is scanned using the automatic document feeder, allowing you to verify that all
originals were correctly scanned.
1
Originals
• To use the verification stamp function, the optional stamp unit must be installed.
• When 2-sided originals are used, the front of each original is stamped twice.
• If an error occurs during scanning, an original that was not scanned may be stamped.
• When the "O" mark that is stamped on originals starts to become faint, replace the stamp cartridge.
For the procedure for replacing the stamp cartridge, see
Place originals in the automatic document feeder.
1
► AUTOMATIC DOCUMENT FEEDER (page 1-67)
Enter the destination fax number.
2
• Entering a destination number using the numeric
• Retrieving a destination from an address
• Using a search number to retrieve a
• Retrieving a destination from a global address
• Using a transmission log to
Tap the [Detail] key to change to normal mode.
3
► Changing mode from each mode (page 4-8)
Position of verification stamp
"REPLACING THE STAMP CARTRIDGE (page
keys►page 4-11
book►page 4-12
destination►page 4-15
book►page 4-16
resend►page 4-18
4-88
An "O" mark is
stamped in
1 fluorescent
pink.
Original are
scanned
1-130)".