SENDING BOTH SIDES OF A CARD AS A
SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.
Originals
Front
Back
• When using card shot, the original must be placed on the document glass.
• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Specify the destination.
☞
2. ENTERING DESTINATIONS
2
When scanning to USB memory in USB memory mode, there is no need to specify the destination. Go to step 3.
Transmission
Example of an 8-1/2" x 11" (A4)
size portrait scan transmission
(page 25)
Transmitted image
Place the original face down on the
document glass.
102
Example of an 8-1/2" x 11" (A4)
size landscape scan transmission