Copying Both Sides Of A Card As Asingle Page (Card Shot) - Sharp MX-B350W User Manual

COPIER►SPECIAL MODES
COPYING BOTH SIDES OF A CARD AS A
SINGLE PAGE (CARD SHOT)
This function copies the front and reverse sides of a card on one sheet, not on separate sheets.
This function is convenient for making copies for identification purposes and helps save paper.
Front
Back
Press the [SPECIAL FUNCTION] key, select "Special Modes" with the [ ][ ]
1
keys, and press the [OK] key.
Select "Card Shot" with the [ ] [ ] keys and press the [OK] key.
2
3
• The horizontal and vertical dimensions can each be set to value from 1 to 8-1/2".
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with 2-Up / 4-Up copy, and ID card copy.
• The default settings for the horizontal and vertical dimensions in this screen can be set in
the system settings.
Example of a portrait copy
Specify the card size in the Card Shot screen.
Select horizontal (X) or vertical (Y) with the [
[ ][ ] keys, and press the [OK] key. Repeat for the other dimension.
2-21
Example of a landscape copy
][ ] keys, specify the dimension with the
Card Shot Default (page 7-17) in