Maintenance; Checking The Total Output Count And Toner Remaining; Adjusting The Display Contrast - Sharp MX-B350W User Manual

BEFORE USING THE MACHINE►MAINTENANCE

MAINTENANCE

This section explains how to check the total count or toner remaining, adjust the display contrast, clean the machine,
and replace the toner cartridge.
CHECKING THE TOTAL OUTPUT COUNT
AND TONER REMAINING
To check the total number of pages output in copy, print, and fax modes hold down the
[COPY] key when the machine is in the standby state. The counts will appear while the key
is held down. The total output count can be used as a guideline for cleaning. When the total
output count exceed "99,999,999", the counts return to "0".
The toner level is shown at the bottom of the screen.
• You can also check by pressing the [SPECIAL FUNCTION] key and selecting "Total Count" in the function menu screen.
• Each two-sided sheet that is output is counted as two pages.
• Blank copies and blank prints are included in the count.
• If the last page of a two-sided printing job is blank, it is not included in the count.

ADJUSTING THE DISPLAY CONTRAST

The contrast of the display can be adjusted as explained below.
Press the [SPECIAL FUNCTION] key.
1
The function screen appears.
Select "Display Contrast" with the [ ] or [ ] key.
2
3
Adjust the contrast with the [ ] or [ ] key.
4
To reset the contrast to the default setting, press the [C] key.
Press the [SPECIAL FUNCTION] key.
5
You will return to the base screen.
Press the [OK] key.
The screen contrast setting screen appears.
1-33
Total Count
Toner Remaining