Using Remote Printer (Netware 3.1X/4.1X/5); Making The Printer Environment With Pconsole - Epson aculaser c2000 Administrator's Manual

Using Remote Printer (NetWare 3.1x/4.1x/5)

This section contains instructions on using the Internal Print
Server in Remote Printer mode under NetWare 3.1x, 4.1x, 5, or
IntranetWare.
First, you need to make a printer environment using PCONSOLE
or NWADMIN (NetWare Administrator tool). See the target
section to make a printer environment.
❏ NetWare 3.1x
"Making the printer environment with PCONSOLE" on page
3-17.
❏ NetWare 4.1x/IntranetWare
"Making the printer environment with Bindery mode" on
page 3-21.
❏ NetWare 4.1x/IntranetWare/NetWare 5
"Making the printer environment with NDS mode" on page
3-24.
Note:
Be sure that the one of the following Clients is installed in your computer;
Novell Client 32 or Novell IntranetWare Client.

Making the printer environment with PCONSOLE

For NetWare 3.1x users, follow the steps below to make the printer
environment with PCONSOLE.
Creating print queues in a file server
1. From any NetWare client, log in to the network with
supervisor privileges.
Settings for NetWare
3
3-17