When There Is A Primary Server At Dial-Up Destination - Epson aculaser c2000 Administrator's Manual

When there is a primary server at dial-up
destination
Possible problems below are examined for cases where the
Internal Print Server has to operate in this environment.
Note:
A precondition is to use a router which has a NetWare proxy reply
function.
For local networks with file servers:
F i l e
s e r v e r
P r i n t e r
❏ At power-up
Since the local file server is accessed before the primary server,
a dial-up is generated. There is no problem since this dial-up
is generated only once when the power supply is turned on.
❏ When the Internal Print Server is not correctly configured
Since the local file server is accessed before the primary server,
a dial-up is generated. This dial-up is repeated at intervals of
approximately 5 minutes. Configure the Internal Print Server
correctly to avoid this phenomenon.
❏ During normal operation (standby)
A SPX Watchdog packet is sent according to the NetWare
protocol rules. Use a router with a proxy response function to
avoid dial-up.
D i a l - u p
r o u t e r
L o c a l n e t w o r k
P r i m a r y f i l e s e r v e r
( p r i m a r y p r i n t s e r v e r )
D i a l - u p
r o u t e r
R e m o t e n e t w o r k
Settings for NetWare
3
3-47