Printing Via Lpr Software In Windows Nt 4.0 - Epson aculaser c2000 Administrator's Manual

Printing via LPR software in Windows NT 4.0

Installing LPR software in Windows NT 4.0
Follow the steps below to install the LPR software on Windows
NT 4.0. If you have already installed Microsoft TCP/IP Printing,
you can skip these steps.
1. Double-click the Network icon in the Control Panel and click
Add on the Services menu.
2. Select Microsoft TCP/IP Printing and click OK.
3. Follow the instructions on the screen.
For more information, see your Windows NT 4.0 documentation.
Setting up the printer in Windows NT 4.0
After configuring the Internal Print Server, you need to set up the
network printer. Follow these steps to set up the printer in
Windows NT 4.0.
1. Make sure the printer is turned on.
2. Click Start, point to Settings, and then click Printers.
3. Double-click the Add Printers icon, and click the My
Computer radio button, then click Next.
4. Click Add Port in the Add Printer Wizard dialog box.
5-6
Settings for Windows 2000/NT