Setting The Ip Address Using Epsonnet Winassist/Macassist - Epson aculaser c2000 Administrator's Manual

Setting the IP Address Using EpsonNet
WinAssist/MacAssist
After connecting the printer to the network, you need to set the
IP address for the Internal Print Server.
To set the IP address, subnet mask, and default gateway using
EpsonNet WinAssist/MacAssist, follow the steps below.
Note:
The example screens are from the Windows 95 operating system using
EpsonNet WinAssist. Other system displays may differ.
1. Confirm that the necessary protocols are installed in the
computer.
If you are using Windows 98/95/2000/NT, TCP/IP must be
installed. If you are using Macintosh, AppleTalk must be
installed.
2. Turn on the printer.
3. Start EpsonNet WinAssist or MacAssist.
Windows 98/95/2000/NT 4.0: Click Start, point to Programs ,
EpsonNet WinAssist , then click EpsonNet WinAssist .
Windows NT 3.51: Double-click the EpsonNet WinAssist icon
in the EpsonNet WinAssist group.
Macintosh: Double-click the EpsonNet MacAssist icon.
2-8
Connecting to the Network