Epson aculaser c2000 Administrator's Manual page 65

Mode:
Select Remote printer.
Frame type:
Select Auto. Do not select other frame types.
Tree name:
Leave as is.
Context:
Leave as is.
Primary printserver name:
Specify the print server name which you have created using
PCONSOLE or NWADMIN.
Printer port number:
Specify the same port number you assigned to the print server
using PCONSOLE or NWADMIN.
8. After making the settings, click OK . The Password dialog box
appears.
9. Type your password (up to 20 characters) and click OK to save
the settings. If you need to set a password, see "About
passwords" on page 9-9.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, you must wait until the on-screen
message appears before turning off your printer.
Settings for NetWare
3
3-31