Setting Up With Sunsoft Solaris 2.4 Or Higher - Epson aculaser c2000 Administrator's Manual

Setting up with SunSoft Solaris 2.4 or higher

In the following steps, substitute the name by which the internal
print server will be known for HOSTNAME, and the name by
which you want the printer to be known for Rprinter.
1. Register the IP address and host name in the \etc\hosts file.
For example:
22.33.44.55 HOSTNAME
2. Register the host name as a print server.
For example:
lpsystem -t bsd HOSTNAME
3. Create the printer.
For example:
lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1 any
4. Make the printer available for printing.
For example:
accept Rprinter
enable Rprinter
5. Print a file using the "lp" command.
For example:
lp -d RPrinter Print-File-Name
Settings for UNIX
8
8-3