Choosing The Printer On A Macintosh - Epson aculaser c2000 Administrator's Manual

Choosing the printer on a Macintosh

To print to a different printer, use the Chooser to select it.
Make sure EtherTalk is active before following the numbered
steps below;
❏ For models without Open Transport:
Select EtherTalk in the Network Control Panel.
❏ For models with Open Transport:
Select Ethernet in the AppleTalk Control Panel.
1. Open the Chooser from the Apple menu.
2. Click the printer driver icon.
3. If there is a zone, click the AppleTalk zone that contains the
printer.
4. Click the printer name.
5. Make sure AppleTalk is active.
6. Close the Chooser.
Settings for Macintosh
6
6-11