Windows Nt 4.0 - Epson aculaser c2000 Administrator's Manual

Windows NT 4.0

1. Be sure that TCP/IP is correctly installed and setup in the
computer and a valid IP address is set for the computer and
printer.
2. Be sure that the IPP settings in EpsonNet WebAssist are
correctly set. See "IPP" on page 9-41 for instructions on setting
up IPP.
3. Click Start, point to Settings, and then click Printers.
4. Double-click the Add Printer icon and click Next.
5. Click the My Computer radio button and click Next.
6. Click the Add Port button, and select EPSON IPP Port from
the list. Then click the New Port button.
EpsonNet Internet Print
12
12-9