Setting up with HP-UX 9.05 or higher
In the following steps, substitute the name that the internal print
server will be known by for HOSTNAME, and the name by which
you want the printer to be known for Rprinter.
1. Register the IP address and host name in the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2. Terminate the printing service.
For example:
lpshut
3. Create the printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel-ormHOSTNAME -
orpaux
4. Restart the printing service.
For example:
lpshed
5. Make the printer available for printing.
For example:
accept RPrinter
enable Rprinter
6. Print a file using the "lp" command.
For example:
lp -DRPrinter Print-File-Name
8-6
Settings for UNIX