Launch Browser button:
Select the printer you want to configure, and then click the
Launch Browser button. EpsonNet WebAssist will start to
configure the Internal Print Server. EpsonNet MacAssist
automatically closes when the browser launches.
Configuration button:
Select the printer you want to configure, and click this button to
configure the Internal Print Server using EpsonNet MacAssist.
Quit button:
Exits EpsonNet MacAssist.
Setting menus
About passwords
The password is required to configure an Internal Print Server.
There is no default password. When you click OK in the setting
dialog box or click the Return to default button, the Password
dialog box appears.
1. To set the password or when you want to change the current
password, click Change.
2. After clicking Change, the following dialog box appears.
Type a password (up to 20 characters) and click OK.
Passwords are case sensitive.
Note:
❏ The password is used for EpsonNet WinAssist, MacAssist, and
WebAssist.
❏ Since a new password becomes effective after the data is sent to
the Internal Print Server, use the old password immediately
after changing the password.
EpsonNet WinAssist/MacAssist/WebAssist
9
9-19