Introduction to NetWare Settings
This chapter explains how to configure the Internal Print Server
for NetWare. First, you need to set up the printer in a NetWare
environment, and then configure the Internal Print Server using
EpsonNet WinAssist.
Supported systems
❏ Server environment
NetWare 3.1/3.11/3.12 (Bindery)
NetWare 4.1/4.11 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare5™ (NDS, Queue-based system, NDPS
2.0)
❏ Client environment
The client environment must be supported by NetWare.
Clients are able to use the printer driver mounted on the
Internal Print Server.
3-2
Settings for NetWare
®
Gateway