Using Nds Print Server (Netware 4.1X/5); Configuring For Netware Using Epsonnet Winassist - Epson aculaser c2000 Administrator's Manual

Using NDS Print Server (NetWare 4.1x/5)

This section contains instructions for using the Internal Print
Server in Print Server mode under NetWare 4.1x, IntranetWare,
or NetWare 5 with NDS mode.
Configuring for NetWare using EpsonNet
WinAssist
Configure the Internal Print Server using EpsonNet WinAssist.
Note:
Be sure that the one of the following Clients is installed in your computer;
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on the printer.
2. From any NetWare client, log in to the target context of the
NDS tree as ADMIN.
3. Run EpsonNet WinAssist from the Start menu.
Settings for NetWare
3
3-11