Configuring For Netware Using Epsonnet Webassist - Epson aculaser c2000 Administrator's Manual

Configuring for NetWare Using EpsonNet
WebAssist
You can configure the Internal Print Server for NetWare using
EpsonNet WebAssist.
Note:
❏ You cannot create a print server, print queue, or printer with
EpsonNet WebAssist. You must have created these objects before
using EpsonNet WebAssist.
❏ A web browser must be installed in your computer.
❏ TCP/IP must be correctly set for the computer and Internal Print
Server.
❏ Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.
1. Turn on the printer.
2. Run EpsonNet WebAssist by either of the following methods:
❏ Run EpsonNet WinAssist or EpsonNet MacAssist. Click
the printer you want to configure from the list and click
the Launch Browser button.
❏ Open your browser, and type in the IP address of the
Internal Print Server directly. Do not run EpsonNet
WinAssist or MacAssist.
http:// the IP address of the Internal Print Server/
Settings for NetWare
3
3-43