Epson aculaser c2000 Administrator's Manual page 185

ESCP2 and FX Emulation
Items
Emulation
Font
Pitch
Condensed
T. Margin
Text
CG Table
Country
Auto CR
Auto LF
Bit Image
Zero Char
Set button
Reload button
Explanations
Select ESCP2 or FX.
Select a font which is used for printing.
Select a character pitch.
Use this option to change the character
spacing.
Use this option to specify the distance from
the top of the sheet to the baseline of the
first printable line.
Use this option to set the page length in
lines.
Use the character generator table option
to select the graphics character table, or
the italics table.
Use this option to select one of the
international symbol sets.
Use the automatic carriage return option
to perform a carriage-return line-feed (CR-
LF) operation whenever the print position
exceeds the right margin.
When you set AutoLF to Off, the printer
does not send an automatic line feed (LF)
command with each carriage return (CR).
When on, the printer adds a line feed to
each carriage return it receives.
With Bit Image set to Dark or light, your
printer can correctly emulate the graphics
densities set with the printer command.
When you select Dark, the bit image
density is high. When you select Light, the
bit image density is low.
Select whether the printer prints a slashed
zero or an unslashed zero.
Saves any changes.
Clears any changes and reloads the
previous settings.
EpsonNet WinAssist/MacAssist/WebAssist
9
9-35