Instructions For Using A Dial-Up Networks; Using A Dial-Up Network In Each Mode - Epson aculaser c2000 Administrator's Manual

10. Click the SUBMIT button and type the password to update the
settings. The same password is required for EpsonNet
WinAssist, MacAssist, and WebAssist. See "Password" on
page 9-44 for more information on setting the password.
11. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser or send a job to the printer until this message appears.
Then, follow the on-screen instructions to reset the printer.

Instructions for Using a Dial-Up Networks

This chapter contains explanations about and instructions for
using a dial-up network.
Note:
The primary server described in this manual indicates a primary time
server which offers time to the workstations on the network.

Using a dial-up network in each mode

Print Server mode:
Because the Internal Print Server polls the primary server for jobs
in Print Server mode, it is not recommended that the primary
server be located on a dial-up connection. A permanent
connection should be used instead.
Remote Printer mode:
In Remote Printer mode, it is possible for the Internal Print Server
to operate in this configuration if the router has a proxy reply
function. However, unnecessary dial-ups are made when the
primary server is down, so it is recommended that a dial-up
exclusive connection line is used.
3-46
Settings for NetWare