Introduction To Os/2 Settings; Printing With Tcp/Ip; Setting Up The Printer; Settings For - Epson aculaser c2000 Administrator's Manual

Introduction to OS/2 Settings

This chapter describes how to configure and use the Internal Print
Server with an IBM OS/2 System, which includes OS/2 Warp 3
and 4 (OS/2 Warp Connect and OS/2 Warp Server).
Supported systems
❏ OS/2 Warp 3, OS/2 Warp 4
❏ lprportd (TCP/IP)
❏ NetBIOS over TCP/IP

Printing with TCP/IP

This section explains TCP/IP printing using lprportd supported
by standard OS/2. Follow the steps below to set up the printer.

Setting up the printer

1. Double-click the OS/2 System folder, then the System Setup
folder, and then double-click the TCP/IP Configuration icon.
7-2
Settings for OS/2