Configuring For Netbeui Using Epsonnet Webassist - Epson aculaser c2000 Administrator's Manual

6. Type your password (up to 20 characters) and click OK to save
settings. If you are entering a password for the first time, click
Change and set the password. For more information about
passwords, see "About passwords" on page 9-9.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, you must wait to turn off your printer
after the on-screen message appears.
Configuring for NetBEUI using EpsonNet
WebAssist
To configure the Internal Print Server using EpsonNet WebAssist,
follow the steps below.
Note:
❏ A web browser must be installed in your computer.
❏ TCP/IP must be correctly set for the computer and Internal Print
Server.
❏ Do not operate EpsonNet WinAssist and EpsonNet WebAssist at
the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser and OS
documentation.
Settings for Windows 98/95
4
4-7