Printing With Tcp/Ip; Configuring For Tcp/Ip Using Epsonnet Winassist; Printing Via Standard Tcp/Ip Port Monitor In Windows; In Windows 2000 - Epson aculaser c2000 Administrator's Manual

Printing with TCP/IP

To use the printer on a TCP/IP network in Windows NT (LPR),
follow the steps below.

Configuring for TCP/IP using EpsonNet WinAssist

To use TCP/IP on the network, you need to set an IP address for
the Internal Print Server.
See "Setting the IP Address Using EpsonNet
WinAssist/MacAssist" on page 2-8 to configure the Internal Print
Server for TCP/IP.
Note:
Make sure you have installed TCP/IP in your operating system. For
information on installing TCP/IP, see your operating system's online
help.
Printing via Standard TCP/IP Port Monitor in
Windows 2000
When using the printer on a TCP/IP network in Windows 2000,
follow the steps below to connect the network printer to your
computer using Standard TCP/IP Port Monitor.
Setting up the printer in Windows 2000
1. Make sure the printer is turned on.
2. Click Start, point to Settings, and then click Printers.
3. Double-click Add Printer to start the Add Printer wizard, and
then click Next.
4. Click Local printer, clear the Automatically detect my
printer check box, and then click Next.
Settings for Windows 2000/NT
5
5-3