Web Printer Function Setting (Web Printer); Reset Process When The Ninit Signal Is On (Input Prime); Ribbon Near End Detection Setting (Rbn Near End); Expansion I/O Operation Mode Setting (Ex. I/O) - Toshiba B-SX4 Series Key Operations Manual

(21) Web printer function setting (WEB PRINTER)

RESTART
FEED

(22) Reset process when the nInit signal is ON (INPUT PRIME)

RESTART
FEED

(23) Ribbon near end detection setting (RBN NEAR END)

RESTART
FEED

(24) Expansion I/O operation mode setting (EX. I/O)

RESTART
FEED
(25) Centronics operation mode setting (CENTRO.)
RESTART
FEED
• OFF: Web printer function is disabled.
• ON: Web printer function is enabled.
• OFF: The reset process is not performed.
• ON: The reset process is performed.
• 70 m: A ribbon near end state is detected when the remaining ribbon
length is 70 m.
• 30 m: A ribbon near end state is detected when the remaining ribbon
length is 30 m.
• OFF: A ribbon near end state is not detected.
NOTE: There are some variations in detecting the ribbon near end
state. It is preferable to use this setting for reference
purposes.
• TYPE1: Standard mode
• TYPE2: In-line mode
• SPP: Compatibility mode
• ECP: ECP mode
- 69 -