Preparing to use the printer
0.
This section explains how to set up the printer, connect a computer, and connect the power cable.
Setup locations
Do not set up in the following locations.
Locations subject to direct sunlight
Near windows
Locations that are very hot or humid
Locations subject to extreme changes in temperature
Locations subject to vibrations
Locations that are very dusty
New equipment that generates magnetic or electromagnetic waves
Locations near flame or water vapor
On an unstable table
There is a risk of fire, electric shock, and injury.
Set up the printer in a location that is flat and level, with good ventilation, and enough space to do operations.
Also, provide open space around the printer as shown in the illustrations below.
[ A ]
[ A ]
[A]: 100 mm (3.94")
[B]: 550 mm (21.65")
[C]: 150 mm (5.91")
18 Preparing to use the printer
[ B ]
[ C ]
[ C ]