Automatic Calibration Setting (Supported From V4.4); Operation Example Of Automatic Calibration Setting - Toshiba B-SX4 Series Key Operations Manual

5.11 AUTOMATIC CALIBRATION SETTING (SUPPORTED FROM V4.4)

5.11.1 Operation Example of Automatic Calibration Setting

O N L I N E
B - S X 4 T
P A U S E
B - S X 4 T
< 1 > R E S E T
< 2 > P A R A M E T E R
< 3 > A D J U S T
< 4 > D U M P
< 5 > E X P A N D
< 6 > A U T O
Power ON
V 4 . 4
[PAUSE]
V 4 . 4
[RESTART]
[FEED]
S E T
[FEED]
S E T
[FEED]
M O D E
[FEED]
M O D E
[FEED]
C A L I B
[PAUSE]
(1) Idling or printing normally
(2) Press the [PAUSE] key.
(3) "PAUSE" is displayed.
(4) Hold down the [RESTART] key for 3 seconds
or more while the printer is in a pause state.
(5) The reset menu is displayed.
(6) Press the [FEED] key.
(7) System mode menu display
(Parameter setting)
(8) Press the [FEED] key.
(9) System mode menu display
(Fine adjustment value setting)
(10) Press the [FEED] key.
(11) The receive buffer dumping menu is displayed.
(12) Press the [FEED] key.
(13) The BASIC expansion mode menu is
displayed.
(14) Press the [FEED] key.
(15) The automatic calibration menu is displayed.
(16) Press the [PAUSE] key.
- 25 -