Lan Enable/Disable Setting (Supported Only By V4.4) - Toshiba B-SX4 Series Key Operations Manual

5.12 LAN ENABLE/DISABLE SETTING (SUPPORTED ONLY BY V4.4)

5.12.1 Operation Example of LAN Enable/Disable Setting
O N L I N E
B - S X 4 T
P A U S E
B - S X 4 T
< 1 > R E S E T
< 7 > L A N
< 7 > L A N
O N S N M P
< 7 > L A N
O F F
< 7 > L A N
O N S N M P
< 7 > L A N
O N S N M P
< 7 > L A N
Power ON
V 4 . 4
[PAUSE]
V 4 . 4
[RESTART]
[RESTART]
[PAUSE]
O N
[FEED] or [RESTART]
[FEED] or [RESTART]
O N
[FEED] or [RESTART]
O F F
[PAUSE]
(1) Idling or printing normally
(2) Press the [PAUSE] key.
(3) "PAUSE" is displayed.
(4) Hold down the [RESTART] key for 3 seconds
or more while the printer is in a pause state.
(5) The reset menu is displayed.
(6) Press the [RESTART] key.
(7) LAN enable/disable setting menu display
(8) Press the [PAUSE] key.
(9) The current setting is displayed.
(10) Change the setting from LAN ON to OFF using
the [FEED] or [RESTART] key.
(11) The new setting is displayed.
(12) Change the setting from LAN OFF to ON using
the [FEED] or [RESTART] key.
(13) The new setting is displayed.
(14) Change the setting from SNMP ON to OFF
using the [FEED] or [RESTART] key.
(15) The new setting is displayed.
(16) Press the [PAUSE] key.
(17) LAN enable/disable setting menu display
- 28 -