Reset - Toshiba B-SX4 Series Key Operations Manual

5.6 RESET

O N L I N E
B - S X 4 T
P A U S E
B - S X 4 T
< 1 > R E S E T
O N L I N E
B - S X 4 T
<Supplementary Explanation>
(1) If the [RESTART] key is held down for 3 seconds or more when the printer is in an error
state from which it can resume printing (the state of "Restoration by the [RESTART] key"),
the reset menu is displayed.
(2) If the [RESTART] key is released within 3 seconds when the [RESTART] key is held down
during an error or a pause, the printer resumes printing a label. (The reset menu is not
displayed.) However, if a communication error or command error has occurred, the printer
enters the usual initial state when the [RESTART] key is pressed. (Even if the [RESTART]
key is released within 3 seconds, the printer is reset.)
Power ON
V 1 . 0 A
[PAUSE]
V 1 . 0 A
[RESTART]
[PAUSE]
V 1 . 0 A
(1) Idling or printing normally
(2) Press the [PAUSE] key.
* If the [PAUSE] key is pressed during
5 2
printing, this message is displayed and
printing is stopped.
(3) Hold down the [RESTART] key for 3
seconds or more while the printer is in a
pause state.
(4) The reset menu is displayed.
(5) Press the [PAUSE] key.
(6) The printer is in the usual initial state.
- 7 -