Table of Contents
Advertisement
Outline of the top menu
<0>RESET
<1>DIAGNOSTIC
<2>SET PARAMETERS
<3>TEST PRINT
<4>SENSOR
<5>RAM CLEAR
<6>INTERFACE
<7>RFID
<8>RTC
<9>USB MEMORY
<10>FACTORY TEST
<11>BASIC
<12>XML
<13>LCD PANEL
<14>PASSWORD
8.2 REFLECTING THE SYSTEM MODE SETTINGS TO THE PRINTER
The settings configured in the system mode or user system mode is saved in the printer at the following timings.
・ Periodic saving at 20-msec. interval
・ When Reset menu in the system mode or user system mode is performed
The changes in the settings, with a partial exception, take effect at a power on time or after a reset.
Restart the printer.
Perform self diagnosis, print out the result, check for the print head broken
elements.
Set the parameters for printer functions
Test print quality by printing slant lines, characters and barcodes.
Display the ambient temaprature and print head temparature, and adjust each
level of the media sensors.
Clear the maintenance counter and parameter settings.
Set the interface parameters such as network, USB, RS232C and parallel.
Set the RFID-related parameters.
Set the date & time of the real time clock and choose a real time renewal timing.
Copy data (including firmware) to/from USB memory.
Adjust the printer before shipment.
Set the functions of the BASIC program to be downloaded to the printer.
Set XML functions.
Select a language for the display, choose the items to be displayed, and adjust the
contrast.
Set Password
49
Advertisement
Table of Contents
