Toshiba B-SX4 Series Key Operations Manual page 129

When the RFID module type is set to "U1":
RESTART
FEED
When the RFID module type is set to "H1":
RESTART
FEED
This setting will become effective after the printer power is turned off, and back to on.
Only the tag types, which can be read/written by the modules set by the RFID module setting, are
displayed.
(5) RFID error tag detection
RESTART
FEED
ON: An error tag detection is performed. The tag is read before writing data on it, and
data is written on the tag only when the header data is "A5A5".
OFF: An error tag detection is not performed. Though the tag is read before writing data
on it, data is always written on the tag whatever data is set as the header data.
• EPC C1: 22
• EPC C0: 21
• NONE (When a tag type is not selected.)
• EPC C1 Gen2: 24
• ISO18000-6B: 23
• C220: 13
• Tag-it: 12
• I-Code: 11
• NONE (When a tag type is not selected.)
• C320: 17
• C240: 16
• C210: 15
• ISO15693: 14
• OFF: An error tag detection is not performed.
• ON: An error tag detection is performed
- 126 -