Maintenance Counter; Self-Test Printout Contents - Toshiba B-SX4 Series Key Operations Manual

Hide thumbs Also See for B-SX4 Series:
Table of Contents

Advertisement

6.2.4

Self-test Printout Contents

(1) Maintenance counter

Item
TOTAL FEED
FEED
PRINT
CUT
HEAD U/D
RIBBON
SOLENOID
232C ERR
SYSTEM ERR
POWER FAIL
RFID WT OK
TAGS
RFID VOID
PRINT TAGS
Maintenance Counter
Total label distance covered
Label distance covered
Print distance
Cut count
Head up/down count
Ribbon motor drive time
Contents
Total label distance covered
(cannot be cleared)
Label distance covered
Print distance
Cut count
Head up/down count
Ribbon motor drive time
Head-up solenoid drive time
RS-232C hardware error count
System error count
Momentary power interruption count
Number of successful RFID write
Number of failure in RFID write
Counts when the paper feed motor is driven to feed a
paper or print. (Counts also during a reverse feed
operation.)
When the power is off, the label distance of 50.0 cm or less
may be rounded down and backed up.
Counts while printing. (Counting is not performed during
reverse feed operation.)
B-SX4:
When the power is off, the print distance of 8.2 m or less
is rounded down and backed up.
B-SX5:
When the power is off, the print distance of 5.5 m or less
is rounded down and backed up.
Every cut operation is counted.
When the power is off, a cut count of 31 or less is rounded
down and backed up.
Counts head up/down operations using the ribbon saving
solenoid.
counted as one.)
When the power is off, an up/down count of 31 or less is
rounded down and backed up.
Counts when the ribbon motor is driven to feed a paper or
print. (Counts also during a reverse feed operation.)
For B-SX4:
When the power is off, a drive time of 32 seconds or less is
rounded down and backed up.
For B-SX5:
When the power is off, a drive time of 27 seconds or less is
rounded down and backed up.
- 48 -
0.0 to 3200.0 km
0.0 to 3200.0 km
0.0 to 200.0 km
0 to 1000000
0 to 2000000
0 to 2000 hours
0 to 1000 hours
0 to 255
0 to 15
0 to 15
0 to 9999999
0 to 9999999
Count Conditions
(Combination of up and down operations is
Range

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-sx5 series

Table of Contents