< 1 > D I A G .
C H E C K I N G
< 1 > D I A G .
Print type setting (PRT TYPE)
RESTART
• TRANSFR
• DIRECT
FEED
Issue type setting (TYPE)
• [S]NO CUT
RESTART
• [C]WITH CUT
FEED
NOTE: When an error occurs while printing the results of the self-test, the error message is
displayed and printing is stopped. The error is cleared by pressing the [PAUSE] key,
then the system mode menu is displayed again. Printing is not automatically resumed
after the error is cleared.
V 1 . 0 A
&
P R I N T
V 1 . 0 A
(Thermal transfer printing)
(Direct thermal printing)
(Batch issue)
(Issue with a cut)
- 40 -
(21) Start of automatic self-test
(22) Results printout
(23) The self-test menu is displayed.