Toshiba B-SX4 Series Key Operations Manual page 14

< 2 > P A R A M E T E R
E X . I / O
[PAUSE]
< 2 > P A R A M E T E R
C E N T R O . M O D E
[PAUSE]
< 2 > P A R A M E T E R
P L U G & P L A Y
< 2 > P A R A M E T E R
L B L / R B N E N D
[PAUSE]
< 2 > P A R A M E T E R
P R E P E E L
[PAUSE]
< 2 > P A R A M E T E R
B A C K S P E E D
< 2 > P A R A M E T E R
M A X I C O D E
< 2 > P A R A M E T E R
T H E R M A L H E A D
< 2 > P A R A M E T E R
P A S S W O R D
S E T
T Y P E 1
S E T
S P P
S E T
O F F
[PAUSE]
S E T
T Y P 1
S E T
O F F O F F
S E T
S T D
[PAUSE]
S E T
T Y P E 1
[PAUSE]
S E T
V 2
[PAUSE]
S E T
O F F - - - -
[PAUSE]
- 11 -
(55) Expansion I/O operation mode setting:
Select the expansion I/O operation mode
using the [FEED] and [RESTART] keys.
(56) Press the [PAUSE] key.
(57) Centronics operation mode setting:
Select the Centoronics operation mode
using the [FEED] and [RESTART] keys.
(58) Press the [PAUSE] key.
(59) Plug-and-play operation setting:
Set the plug-and-play operation using
the [FEED] and [RESTART] keys.
(60) Press the [PAUSE] key.
(61) Label end/ribbon end process setting:
Select the label/ribbon end process using
the [FEED] and [RESTART] keys.
(62) Press the [PAUSE] key.
(63) Pre-peel-off process setting:
Set the pre-peel-off process using the
[FEED] and [RESTART] keys.
(64) Press the [PAUSE] key.
(65) Back feed speed setting:
Select the back feed speed using the
[FEED] and [RESTART] keys.
(66) Press the [PAUSE] key.
(67) MaxiCode specification setting:
Select the MaxiCode specification using
the [FEED] and [RESTART] keys.
(68) Press the [PAUSE] key.
(69) Print head type setting:
Select the print head type that is actually
installed, using the [FEED] and [RESTART]
keys.
(70) Press the [PAUSE] key.
(71) System mode password operation setting:
Select the system mode password operation
using the [FEED] and [RESTART] keys.
(72) Press the [PAUSE] key.