(14) RFID channel setting
Available only when the B-SX704-RFID-U2 is installed.
RESTART
FEED
2CH to 8CH, AUTO
Set the channel to be used for writing data onto RFID tags.
When a channel is chosen from 2CH to 8CH, that channel will be repeatedly used.
When the channel is set to AUTO, more than one channels are repeatedly used in the
following order.
AUTO: 2CH → 8CH → 4CH → 3CH → 7CH → 5CH → 2CH
• 8CH
• 2CH
• AUTO
• 8CH
• 2CH
- 130 -