Obtaining The Date Automatically - Oki MB492dn User Manual

2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Change the setting, and then click [Submit].

Obtaining the Date Automatically

You can get date information automatically from an Internet time server, and reflect this on the machine.
1.
Open the Web page of this machine.
About the IP Address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [User Install] > [Time Setup].
5.
Specify your time zone.
6.
Select [Auto] from [Set time].
7.
Enter the SNTP server in [SNTP Server (Primary)].
8.
Enter another SNTP server in [SNTP Server (Secondary)] if necessary.
9.
Click [Submit].
The new setting takes effect when the network function restarts.
Memo
When using SNTP, you cannot set the time from the operator panel.
720