Sending A Fax - Oki MB492dn User Manual

Sending a Fax

1.
Press [Fax/Internet Fax] or the
The touch panel display switches to the fax/Internet fax top screen.
Memo
To display the home screen, press the
2.
Set a document in the ADF or on the document glass.
3.
Press [Fax].
4.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Phone Book
Using a One-touch Button
Selecting from the Transmission History and Reception History
5.
Change settings if necessary.
Memo
If you press the
scanning and sending a document.
[Scan Size]: A4
[Resolution]: Normal
[Density]: 0
You can change the default settings with [Admin Setup].
Fax Setup
Scanning Multiple Documents Continuously on the Document Glass (Continuous Scan (Glass))
Scanning Multiple Documents Continuously with the ADF (Continuous Scan (ADF))
Scanning a Duplex Document (Duplex Scan)
Specifying a Scan Resolution (Resolution)
Setting Scanning for Transmission
Erasing Edge Shadows When Sending (Edge Erase)
6.
Press the
Transmission starts.
(HOME) button.
(START) button without changing anything, the following (factory default) settings are applied for
(START) button.
(FAX) button.
327