Setting Manually - Oki MB492dn User Manual

Setting Manually

1.
Press [Device Settings] on the touch panel.
2.
Press [Easy Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [Network Setting].
6.
Press [Manual].
7.
Enter the IP address, and then press [Next].
8.
Enter the subnet mask, and then press [Next].
9.
Enter the default gateway address, and then press [Next].
10.
Enter the DNS server and WINS server. (Be sure to enter if you use Scan to E-mail, Internet Fax, Scan
to Fax Server, or Scan to Shared Folder.)
If the DNS server and WINS server are not required for the network connection, press [Next] until the pop-up message is displayed
to inform you that the setting is complete.
11.
Press [Close] on a confirmation screen.
905