Oki MB492dn User Manual page 671

Print Setup
Set the print menu and other print functions.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Print Setup].
6.
Select an item, and then change the setting.
Press [OK] by following the on-screen instructions if necessary.
7.
Press [Back] until the home screen is displayed.
Item
Print Menu Print
Settings
Printer
Adjust
Factory
default setting
Copies 1 Set(s)
Duplex OFF
Media Check Enable
Override A4/Letter Yes
Resolution 600dpi
Toner Save Mode OFF
Orientation Portrait
Lines Per Page 64 line(s) or 60
line(s)
Edit Size Cassette size
Width 210 mm (8.3
inch) or
216 mm (8.5
inch)
Length 297 mm (11.7
inch) or
279 mm (11.0
inch)
Manual Timeout 60 seconds
Timeout Injob 40 seconds
Timeout Local 40 seconds
Timeout Network 90 seconds
Description
Sets the number of copies. For local printing, this setting is invalid
except for demo data.
Available range: 1 to 999
Turns the duplex printing function on or off.
[OFF]: simplex printing
[Long Edge Bind]: duplex printing for long-edge binding
[Long Edge Bind]: duplex printing for long-edge binding
Sets whether to check an inconsistency between the paper size and the
page size of documents.
Set the function that automatically switches paper to print from A4 to
Letter if a tray runs out of A4 paper and Letter paper is loaded, or from
Letter to A4 if a tray runs out of Letter paper.
Sets the resolution.
Sets the amount of toner to be saved.
This setting is enabled when copying, printing, printing received faxes,
and printing from USB Memory.
Sets the page orientation.
Sets the number of lines of text per page (for PCL only).
The default number of lines for A4 portrait is 64. The default number of
the width is 60. The number of lines varies depending on the size of
paper in the paper feed tray.
Sets the size of the printable page area if the size is not specified with
the paper edit size command from a computer.
Sets the width of a custom paper size.
Available range: 86 to 216 mm (3.4 to 8.5 inches)
Sets the length of a custom paper size.
Available range: 140 to 1,321 mm (5.5 to 52.0 inches)
Sets for how many seconds the machine waits for paper to be fed
before cancelling a job when using the manual feeder.
Sets for how many seconds the machine waits until pages are output
from when the processing of the received data stops.
Sets how long each port is left opened after a job is complete. (The
network is excluded.)
Sets how long the network port is left opened after a job is complete.
670