Oki MB492dn User Manual page 798

For Mac OS X (Panel Language Setup)
You can change the display language of the operator panel.
1.
Output a menu map for this machine.
2.
Start the panel language setup utility.
Installing from the "Software DVD-ROM"
3.
Select a method of connection.
If you select [TCP/IP], enter an IP address. You can check the IP address on the menu map output in step 1.
4.
Click [OK].
5.
Check that the "Language Format" value on the menu map and the value on the screen meet the
following conditions.
Condition 1: The first digit of the version is the same.
Condition 2: The value displayed on the screen must be the same as the "Language Format" value or a newer (higher) one.
Memo
If Condition 1 is not met, the language set cannot be downloaded. If you attempt downloading with Condition 1 not being met,
an error is displayed on the operator panel. To recover the error, restart the machine. If Condition 1 is met but Condition 2 is
not met, you can use the machine but the names of some settings are displayed in English.
6.
Select a language.
7.
Click [Download].
The language setting file is sent to the machine, and when sending is complete, a message is displayed.
8.
Restart the machine.
797