Oki MB492dn User Manual page 100

3 Duplex Scan
4 File Name
5 Subfolder
6 Continuous Scan
7 Register to Job Macro
[Advanced] Tab
Item Description
1 File Format Specifies a file format for the scanned file.
2 Encrypted PDF Creates an encrypted (password-protected) scanned file.
This function is available only when the file format is set to PDF.
3 Compression Specifies a compression level for the scanned file.
Rate
4 Edge Erase Eliminates a black shadow that may appear around the edges on the scanned file when scanning, for example,
a book.
[Image Settings] Tab
Item Description
1 Density Adjusts a level of scan density.
2 Document Type Selects a document type to scan at the most suitable quality.
3 Background Adjusts a level of the document background removal.
Removal
4 Resolution Specifies the resolution to scan a document.
5 Contrast Adjusts differences between bright and dark sections on a document to make images and texts easier to
view and read.
6 Hue Specifies the level of hue to scan a document.
7 Saturation Specifies the level of saturation to scan a document.
8 RGB Specifies the RGB values to scan a document.
[Function Settings] > [Profile] Tab
Delete a selected profile on the [Profile] tab.
Specifies duplex scanning.
Set this function when scanning both sides of a document.
Specifies a file name for the scanned file.
If not specified, the file will be named according to the factory default setting.
Specifies a sub folder in which to save the scanned document.
If not specified, the scanned data will be saved in the root folder.
Scans multiple documents as a single job.
Registers current settings to Job Macro.
99