Oki MB492dn User Manual page 900

11.
Select AES and then press [Next].
12.
Enter the Pre-shared Key, and then press [Next].
The SSID of the wireless LAN access point that you selected in step 10 and the security setting that you selected in step 12 are
displayed in on a confirmation screen.
13.
If the displayed content is the same as that you prepared in step 1, press [Yes].
Memo
It takes approximately 30 seconds for the machine to detect the wireless LAN access point.
When the following screen is displayed, the setting of the wireless LAN is complete.
If the machine cannot detect the specified wireless LAN access point, the following screen is displayed. In such a case, the
specified wireless LAN access point may not be operating properly, or the entered information (the SSID, encryption method, and
encryption key) may be wrong. Check.
Topics
Checking That Connection is Established Correctly
899