Oki MB492dn User Manual page 673

Symbol Set
A4 Print Width
White Page Skip
CR Function
LF Function
Print Margin
Pen Width Adjust
Tray Tray 1
ID#
Tray 2 (Optional)
MP Tray
PS Setup L1 Tray
Network PS-Protocol
USB PS-Protocol
XPS Setup DigitalSignature
DiscardControl
MC Mode
Unzip Mode
White Page Skip
SIDM Setup SIDM Manual ID#
SIDM Manual2 ID#
SIDM MP Tray ID#
SIDM Tray1 ID#
SIDM Tray2 ID#
IBM PPR Character Pitch
Setup
Font Condense
Character Set
Symbol Set
Letter O Style
Zero Character
Line Pitch
White Page Skip
CR Function
LF Function
Line Length
Form Length
TOF Position
Left Margin
Fit To Letter
Text Height
EPSON FX Character Pitch
Setup
Character Set
Available range: 4.00 to 999.75 point. (0.25 point increments)
PC-8 Selects a PCL symbol set.
78 Column Sets the number of digits for automatic line feed on A4 paper.
OFF Selects whether to print blank pages.
CR Sets the machine operation when receiving CR code.
LF Sets the machine operation when receiving LF code.
Normal Sets the nonprintable area of the page.
ON Sets whether to emphasize thin lines so that the lines look thicker.
1 Sets a value that specifies a tray with the PCL paper source specification
command.
5
Available range: 1 to 59
4
Display condition for [Tray 2]: the second tray unit is installed.
Type 1 Set the paper tray number for the Level 1 operator.
[Type 1]: The effective number for paper tray starts from 1.
[Type 2]: The effective number for paper tray starts from 0.
RAW Specifies PS communication protocol mode of data from Network.
RAW Specifies PS communication protocol mode of data from USB.
OFF Sets the DigitalSignature functions.
Auto Sets the DiscardControl function.
ON Sets the MarkupComaptibility function.
Speed Sets the XPS file decompression method.
OFF Selects whether to output blank pages in XPS.
2 Sets SIDM Manual MP numbers and Tray IDs.
3
4
1
5
10 CPI Specifies character pitches in IBM PPR emulation.
12CPI to 20CPI Specifies 12CPI pitches for Condense Mode.
SET-2 Specifies a character set.
IBM-437 Specifies a symbol set.
Disable Specifies the style that replaces 9BH with letter o and 9DH with a zero.
Normal Sets the zero to be slashed or unslashed.
6 LPI Specifies the line spacing.
OFF Selects whether to print blank pages.
CR Selects a carriage return from [CR] or [CR+LF].
LF Selects a line feed from [LF] or [LF+CR].
80 Column Specifies the number of characters per line.
11.7 inch or 11 Specifies the length of paper.
inch
0.0 inch Specifies the distance from the top edge of paper to where the cut is to
be made.
0.0 inch Specifies the distance from the left edge of paper to where the cut is to
be made.
Disable or Sets the printing mode that can fit paper to the printable area
Enable equivalent to 11 inches (66 lines).
Same Sets the height of a character.
SAME: The height stays the same regardless of CPI.
DIFF: The height varies according to CPI.
10 CPI Specifies character pitches.
SET-2 Specifies a character set.
672