List; Admin Setup - Oki MB492dn User Manual

List

This function is displayed only if you log in as the administrator of the machine.
Item Description
Profile You can set information that is required for performing Scan to Network PC, and register it as a profile. You can set a
protocol, save destination URL, file name, density, document size, color format, monochrome format, and other settings
to a profile.
NetworkScan Registers, deletes, and edits a destination for a network scan.

Admin Setup

This function is displayed only if you log in as the administrator of the machine.
Set/Edit device PIN and User
You can set Access Control List for each user. You can register up to 5002 users (two of which are reserved IDs).
Network
Item
General Network Settings
Wireless Setting
TCP/IP
NBT
Mail Server
E-mail Receive
Settings
Alert Settings
SNMP Settings
Trap
IPP Settings
Authentication Sets authentication.
Windows Rally
Description
Sets the general network settings.
Sets the wireless settings.
Sets TCP/IP information.
TCP/IP
Setting an IP Address from the Operator Panel on This Machine
Using the Software DVD-ROM (For Windows)
Sets NetBIOS over TCP information.
NBT
Sets a mail server.
Sets an e-mail receive settings.
Registering from the Web page
Sets the function that enables you to receive e-mail alerts about events that have occurred on the
machine.
Checking the Status of This Machine and Error by E-mail
Sets SNMP.
SNMP
Checking the Status of This Machine by Using SNMPv3
Sets SNMP Trap.
SNMP Trap
Sets the function that enables you to perform IPP print.
IPP
Sets Windows Rally information.
Windows Rally
493