Selecting A Remote Scan Mode - Oki MB492dn User Manual

Selecting a Remote Scan Mode

There are three Remote Scan modes: Simple Scan, Manual Scan, and Secure Scan.
In Simple Scan mode, you can start scanning anytime if the machine is in standby status.
In Manual Scan mode, you must turn Remote Scan on the touch panel before starting scanning.
In Secure Scan mode, you can operate only from a specified computer. Only one computer can be connected at a time.
If you perform a remote scan via the WSD Scan connection, you can start scanning only from computers that are already registered in
this machine, regardless of the Remote Scan modes.
Using WSD Scan
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [PC Scan Mode].
Available scan modes:
7.
Select a scan mode, and then press [OK].
8.
Press [Back] until the home screen is displayed.
105