Using the Operator Panel
You can set Power Save mode from the operator panel.
Set the length of idle time before entering Power Save mode.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [Management].
6.
Press [Power Save].
7.
Press [Power Save Time].
8.
Select transition time.
Available transition time settings
1 minute*,
2 minutes,
* indicates the factory default setting.
3 minutes,
4 minutes,
5 minutes,
10 minutes,
15 minutes,
524
30 minutes,
60 minutes