Oki MB492dn User Manual page 1010

For Windows Server 2003
Memo
The descriptions may vary depending on your edition.
1.
Click [Start] on the Windows task bar, click [Control Panel], and then double-click [System].
2.
Select the [Computer Name] tab, and then click [Change].
3.
Check the name of [Computer name].
You need the computer name you checked when you register the destination in the machine. Write it down in "Name of the
transmission destination computer" on the setting information sheet.
4.
Create a folder in which documents are saved on the computer.
Memo
It is recommended to create the folder under the C or D drive.
An example of creating the folder named "share" is covered here.
You need the folder name you created when you register the destination in the machine. Write it down in "Name of the
shared folder" on the setting information sheet.
5.
Right-click the created folder, and then click [Sharing and Security].
6.
Select [Share this folder], and then click [Permissions].
7.
Select the user name, and then check the [Allow] of [Full Control].
8.
Click [OK].
9.
Click [Close].
1009